Miele HR 1124, Operating Instructions Manual

Page: 125 / 136

Cleaning and care
65
Delaying the start of the Self Clean
program
Start the program as described and
then set the desired finish time within
the first five minutes of starting the
program.
 Select OK.
 Move the symbol  with  or  until
it appears under  .
 appears.

Confirm with OK.
The display will then show the finish
time calculated from the current time of
day plus the duration of the selected
Self Clean program.
 Set the desired finish time using  or
 .
 Confirm with OK.
The finish time is now set and has been
saved.
The oven heating will turn off.
The finish time can be changed at any
time up until the start time for the
program.
As soon as the start time is reached,
the oven heating and the cooling fan
will turn on. The duration will appear in
the display.
At the end of the Self Clean program


h
  


,

and

will appear in the
display.
The door is locked as long as the

symbol is lit up. The

symbol will start
flashing as soon as the door lock has
been deactivated.
When the door lock has been
deactivated:
–

goes out,
–

flashes,
– short signals will sound if the signal
tone is activated (see "Settings –
 
").

Turn the mode selector to Off.
Acoustic and visual signals are turned
off.

Danger of burns!
Danger of burns! Wait until the oven
has cooled down before removing
any residual soiling left in the oven
compartment from the Self Clean
program.
 Wipe any residues (e.g.ash) left
behind after the Self Clean program
out of the oven compartment and off
of any accessories. The amount of
ash will vary depending on how dirty
the oven was.