Miele H6660BPBRWS Operating And Installation Instructions Download

Page: 19 / 104

Control panel

Symbols

The following symbols may appear in the display:

Symbol

Description



Timer



Allocates an illuminated Sensor button



to an option and

indicates that the option can be selected.



If more than four options are available a bar will appear on the
right-hand side of the display. Use the allocated sensors to scroll
through the list.



The end of a list is indicated by a dotted line. By scrolling down
further, you will reach the beginning of the list again.



Some settings, e.g. display brightness and buzzer volume, are
selected using a bar chart.



A check indicates the currently active setting.



will not be

displayed and the corresponding sensor will not be illuminated.



This symbol indicates that there is additional information and
advice about using the oven. Select

to access the

information.



The system lock or sensor lock is active (see “Settings – Safety”).
The oven cannot be used.



Program finished



Core temperature when using the roast probe

Summary of Contents for H6660BPBRWS









































































































Search results

Summary of Contents for H6660BPBRWS

Reviews:

Related manuals for H6660BPBRWS

Brands by name

Popular brands

Miele H6660BPBRWS, Operating And Installation Instructions

Search results

Summary of Contents for H6660BPBRWS

Reviews:

Related manuals for H6660BPBRWS

Brands by name

Popular brands