manualshive.com logo in svg

Miele H 7164 B, Operating And Installation Instructions, Page: 93 / 116

Share
Download
Miele H 7164 B Operating And Installation Instructions Download Page 93

Problem solving guide

93

Problem

Cause and remedy

The oven interior
lighting does not switch
on.

The halogen lamp is faulty.

Risk of injury caused by hot surfaces.

The oven gets hot during operation. You could
burn yourself on the heating elements, oven
compartment or accessories.
Allow the heating elements, oven compartment
and the accessories to cool before manual
cleaning.

Disconnect the appliance from the mains. Switch
off at the wall and withdraw the plug from the
socket or switch off the fuse of the electrical
installation.

Turn the lamp cover a quarter turn anti-clockwise
to release it and then pull it together with its seal
downwards to take it out.

Replace the halogen lamp (Osram 66725 AM/A,
230 V, 25 W, G9).

Refit the lamp cover together with its seal and turn
clockwise to secure.

Reconnect the appliance to the electricity supply.

Summary of Contents for H 7164 B





















































































































Reviews:

No comments