manualshive.com logo in svg

Miele H 7164 B, Operating And Installation Instructions, Page: 54 / 116

Share
Download
Miele H 7164 B Operating And Installation Instructions Download Page 54

Operation

54

Changing the set cooking durations

Select the 

 sensor control.

Select the desired time.

Confirm with 

OK

.

Select 

Change

.

Change the set time.

Confirm with 

OK

.

Touch the 

 sensor control to return

to the menu of the selected function.

These settings will be deleted in the
event of a power failure.

Deleting the set cooking durations

Select the 

 sensor control.

Select the desired time.

Confirm with 

OK

.

Select 

Delete

.

Confirm with 

OK

.

Touch the 

 sensor control to return

to the menu of the selected function.

If you delete 

Duration

, the set times for

Finish at

 and 

Start at

 are also deleted.

If you delete 

Finish at

 or 

Start at

, the

cooking programme will start using
the cooking duration set.

Cancelling a cooking
programme

Touch the sensor control for the
selected function or the 

 sensor

control.

When 

Cancel process

 appears in the

display, confirm with 

OK

.

The oven compartment heating and
lighting will then switch off. Any cooking
durations set will be deleted.

The main menu will appear.

Pre-heating the oven

The 

Booster

 is used in conjunction with

certain functions to quickly pre-heat the
oven.

It is only necessary to pre-heat the oven
in a few instances.

Most dishes can be placed in the
cold oven to make use of the heat
produced during the heating-up
phase.

Pre-heat the oven when cooking the
following food with the following
functions:

– Dark bread dough as well as beef

sirloin joints and fillet with the 

Fan

plus

 

, 

Moisture plus

 

 and

Conventional heat

 

 functions

– Cakes and pastries with a short

cooking duration (approx. 30 minutes
or less) as well as delicate items (e.g.
sponge) with the 

Conventional heat

 

function (without the 

Booster

 function)

Summary of Contents for H 7164 B





















































































































Reviews:

No comments