Miele H 5981 BP Operating And Installation Instructions Download Page 52

Page: 52 / 88

Start

Automatic
(Factory default setting)
A programme will start automatically
approx. 20 seconds after making
your last entry without having to
select Start.

Manual
If "Manual" has been selected, "Start"
will appear at the beginning of each
programme and must be confirmed
before the programme will start.

Recommended temperatures

If you frequently change a
recommended temperature it may be a
good idea to change it permanently.

The recommended temperatures is
displayed next to the function.

When you select a function the
recommended temperature is
highlighted.
The setting range available will also
appear.

Display

Contrast

The contrast is represented by a bar
with seven segments.

P P P P G G GM

Factory default: Four illuminated
segments.

To change the contrast touch the
sensor next to "Lower" or "Higher".

Brightness

The brightness is represented by a bar
with seven segments.

P P P P G G GM

Factory default: Six illuminated
segments.

To change the brightness touch the
sensor next to "Darker" or "Lighter".

Volume

Buzzer tones

The volume is represented by a bar
with seven segments.

P P P P G G GM

Factory default: Three illuminated
segments.

To change the volume touch the sensor
next to "Quieter" or "Louder".

If all segments are illuminated the
volume is on maximum.
If none of the segments are illuminated
the volume has been turned off.

Settings

Summary of Contents for H 5981 BP

























































































Search results

Summary of Contents for H 5981 BP

Reviews:

Related manuals for H 5981 BP

Brands by name

Popular brands

Miele H 5981 BP, Operating And Installation Instructions

Search results

Summary of Contents for H 5981 BP

Reviews:

Related manuals for H 5981 BP

Brands by name

Popular brands