Miele H 5981 BP Operating And Installation Instructions Download Page 53

Page: 53 / 88

Keypad tone

The volume of the keypad tones, which
beep when touched, can be changed
or the sound switched off completely.

P P P P G G GM

Factory default: Three illuminated
segments.

To change the volume touch the sensor
next to "Quieter" or "Louder".

If all segments are illuminated the
volume is on maximum.
If none of the segments are illuminated
the volume has been turned off.

Welcome melody

On
(Factory default)
A melody will be heard when the
oven is switched on.

Off
No melody will be heard when the
oven is switched on.

Speedlight

The options are:

In use

In standby mode

Colour in standby mode

In use

On
(Factory default)
The SpeedLight illumination under
the control panel comes on when the
oven is switched on.

Off
The SpeedLight illumination under
the control panel does not come on
when the oven is switched on.

In standby mode

On
The SpeedLight illumination under
the control panel remains switched
on when the oven is switched off.

Off
(Factory default)
The SpeedLight illumination under
the control panel goes out when the
oven is switched off.

Colour in standby mode

The colour of the SpeedLight
illumination when the appliance is
switched off can be changed.

P P P P G G GM

Factory default: Four illuminated
segments.

To change the colour of the SpeedLight
illumination, touch the sensor next to
"Yellow" or "Red".

If all the segments are illuminated, the
SpeedLight illumination is red.
If one of the segments is illuminated , it
is yellow.

Settings

Summary of Contents for H 5981 BP

























































































Search results

Summary of Contents for H 5981 BP

Reviews:

Related manuals for H 5981 BP

Brands by name

Popular brands

Miele H 5981 BP, Operating And Installation Instructions

Search results

Summary of Contents for H 5981 BP

Reviews:

Related manuals for H 5981 BP

Brands by name

Popular brands