Miele H 5681 B Page 68 Operating And Installation Manual Download

Page: 68 / 84

To remove the catalytic
enamelled back panel, side
panels and roof liner

Make sure the oven heating
elements are switched off and cool.
Danger of burning.

See "Cleaning and care" for information
on cleaning.

Back panel

Remove the runners, together with
the catalytic side panels (if fitted).

Loosen the screws in the back panel
and take it out.

The oven must not be used without
the back panel fitted. This could
cause considerable injury.

Reassemble them in the reverse
order

, making sure all parts are

correctly fitted.

Side panels (if fitted)

Remove the runners, together with
the catalytic side panels.

Remove the side panels from the
runners.

Reassemble them in the reverse
order

, making sure all parts are

correctly fitted.

Roof liner (if fitted)

Remove the runners, together with
the catalytic side panels (if fitted).

Unscrew the wing nut.

Gently lower the element.

Do not use force to pull it down as
this can cause the element to break.

Take care when cleaning the ceiling
of the oven that you do not damage
the receiver for the food probe
located in the middle of the heating
element.

Take out the roof liner.

Reassemble them in the reverse
order

, making sure all parts are

correctly fitted.

Make sure that the wing nut is
screwed back on properly.

Cleaning and care

Summary of Contents for H 5681 B





















































































Search results

Summary of Contents for H 5681 B

Reviews:

Related manuals for H 5681 B

Brands by name

Popular brands

Miele H 5681 B, Operating And Installation Manual

Search results

Summary of Contents for H 5681 B

Reviews:

Related manuals for H 5681 B

Brands by name

Popular brands