Starting a pyrolytic process
^
Take all accessories out of the oven.
^
Select the "Pyrolytic
^
" function.
Py I
PY I
will appear in the display. The
number will start flashing.
^
Use the
V
or
W
sensor to scroll
between
PY I
,
2
and
3
.
^
Start the pyrolytic process required
with the OK sensor.
Py I
0
The door will lock and the heating will
switch on.
I:53
m
T S 0
V
The duration of the cleaning
programme can be seen in the display
by calling up the
T
(Duration) symbol.
You can
set a finish time for the
pyrolytic process
during the first five
minutes after starting the programme,
for example, to take advantage of
cheaper night electricity tarifs. To do
this:
^
Call up the
S
(Finish) symbol and
use the
W
sensor to change the end
time.
You can change the end time if you
wish at any time up until the
programme starts.
At the end of pyrolytic cleaning
process
– "
PYE
" will appear in the display.
– the
S
(Finish) symbol will start
flashing.
– a buzzer will sound, if it is switched
on (see "
%
Settings –
P 2
").
^
Turn the function selector to "0".
The buzzer will stop and the symbols in
the display will go out.
If the function selector is not moved, the
buzzer (if switched on) will sound every
five minutes as a reminder that the
programme has finished.
This
reminder
continues for up to
30 minutes.
Cleaning and care
57