Miele H 5081 BP Page 68 Operating And Installation Instruction Download

Page: 68 / 84

To remove the side runners

Make sure the oven heating
elements are switched off and cool.
Take care not to burn yourself on
them.

Pull the runners forwards out of the
holder and remove.

Reassemble them in the reverse
order

, making sure all parts are

correctly fitted.

To lower the top heat/grill
element

Make sure the oven heating
elements are switched off and cool.
Take care not to burn yourself on
them.

Remove the shelf runners from the
oven.

Unscrew the wing nut and lower the
top heating element.

Do not use force to pull it down as
this can cause the element to break.

Take care when cleaning the ceiling
of the oven that you do not damage
the receiver for the food probe
located in the middle of the heating
element.

Reassemble them in the reverse
order

, making sure all parts are

correctly fitted.

Make sure that the wing nut is
screwed back on properly.

Cleaning and care

Summary of Contents for H 5081 BP





















































































Search results

Summary of Contents for H 5081 BP

Reviews:

Related manuals for H 5081 BP

Brands by name

Popular brands

Miele H 5081 BP, Operating And Installation Instruction

Search results

Summary of Contents for H 5081 BP

Reviews:

Related manuals for H 5081 BP

Brands by name

Popular brands