Miele H 5081 BP Page 24 Operating And Installation Instruction Download

Page: 24 / 84

Symbols

The following symbols will appear in the display in addition to the text:

Symbol Meaning

Appears beside an option and is allocated to a sensor

. You select

the option you want by touching the sensor beside the dot.

A maximum of 3 options can be shown in the display.
These arrows indicate if more than three options are available.
You can scroll up

or down

(

the list by touching the appropriate

sensor.

ZZZZZZZ

The end of a list is indicated by a dotted line. By scrolling down further,
you reach the beginning of the list again.

For increasing or decreasing the time or temperature shown in the
display.
These can also be entered using the numerical keypad.

Back

Selecting this option and confirming with OK returns you to the previous
list of options.

(

A tick will appear beside the option which is currently selected. A "

" will

not appear in front of this symbol.

This indicates additional information that is available.
This information window can be cleared by selecting OK.

The system lock is "Permitted". See "Settings - Safety".

On = Operation not possible.

Off = Operation possible.

A minute minder time has been set.

Controls

Summary of Contents for H 5081 BP





















































































Search results

Summary of Contents for H 5081 BP

Reviews:

Related manuals for H 5081 BP

Brands by name

Popular brands

Miele H 5081 BP, Operating And Installation Instruction

Search results

Summary of Contents for H 5081 BP

Reviews:

Related manuals for H 5081 BP

Brands by name

Popular brands