,
CAUTION: Before servicing,
disconnect the power supply by
either removing the fuse, shutting off
the power main or manually
"tripping" the circuit breaker.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous and
the manufacturer will not be held
responsible.
Before connecting the appliance to
the power supply, make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
Only operate the appliance after it
has been installed into cabinetry.
The plug must be plugged into an
appropriate outlet that is installed
and grounded in accordance with all
local codes and ordinances.
Data plate
The silver data plate is located along
the front side of the oven (door open).
Power supply
The oven comes equipped with a
7.2 ft. (ca.1.9 m) power cord with a
NEMA 14-30 P molded plug ready for
connection to a 208 V, 20 A, 60 Hz
power supply only.
Maximum rated load: 3330 W
WARNING: THIS APPLIANCE
MUST BE GROUNDED
Installer:
Please leave these instructions with
the consumer.
Electrical connection
49
Summary of Contents for H 4242 B
