If the oven interior is extremely
soiled, the Self Clean program will
automatically shut off. Remove large
pieces of debris and restart the Self
Clean program.
A tone will sound and the "
p
" symbol will
flash when the Self Clean program has
ended.
Once the oven has cooled remove
the pyrolytic ash.
Most debris can be removed with a
damp cloth.
Sometimes a film can build up on the
oven door. This can be removed with a
shielded blade scraper or a non-abra-
sive sponge and a mild solution of
warm water and liquid soap.
The Self Clean program can be set to
start at a later time like the other pro-
grams, See "Clock / Timer operation".
The Self Clean program will interrupt,
– if the program selector is turned to
the "0" position,
– if another program is selected during
the cleaning process,
– in the event of a power failure.
The oven door will remain locked if the
program is interrupted.
The door will only open again when the
oven temperature has fallen below
530°F/280°C and the program selector
has been turned to the "0" position and
then to "Light". The "
p
" symbol will light
up in the display.
After 30 seconds, the "
p
" symbol will
flash and the door can be opened.
If the heating phase of the Self Clean
program interrupts independently, the
error message "F 15" will appear in the
display.
The door will only open again when the
oven temperature has fallen below
530°F/280 °C and the program selector
has been turned to the "0" position and
then to "Light".
After approx. 60 seconds the error mes-
sage will go out and "
PYRO
" and the "
p
"
symbol will light up in the display.
After 30 seconds, the "
p
" symbol will
flash and the oven door can be
opened.
Cleaning and care
46
Summary of Contents for H 387-1 BP KAT
Page 27: ...Guide to the programs ...
Page 63: ...63 ...
