Features
24
FlexiClip runners HFC 7x
You can use the FlexiClip runners on
shelf levels 1–4.
Push the FlexiClip runners right into
the oven compartment before placing
accessories on them.
The accessories will then automatic-
ally sit securely in between the stop-
pers at either end of each runner and
be prevented from sliding off.
The FlexiClip runners can support a
maximum load of 15 kg.
Fitting and removing FlexiClip run-
ners
Danger of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the heat-
ing elements, oven compartment or
accessories.
Allow the heating elements, oven
compartment and the accessories to
cool before fitting or removing the
FlexiClip runners.
The FlexiClip runners are fitted in
between the two rails that make up a
shelf level.
The FlexiClip runner with the Miele logo
should be fitted on the right.
When fitting or removing the FlexiClip
runners,
do not
extend them.
Hook the FlexiClip runner onto the
front of the lower rail of a shelf level
(1.) and then push it along the rail into
the oven compartment (2.).