. . . strange noises are heard when
the microwave or microwave / combi-
nation mode is being used.
^
Check whether:
– sparks are being created by the use
of metallic crockery, (see Section on
Suitable crockery).
– the food is covered with aluminium
foil. If so, remove it.
. . . a programme can not be stored
using "M".
^
Check whether:
– Microwave mode has been selected,
– a power setting and time have been
entered.
. . . the required time for a Memory-
Programme stage can not be set
^
Check whether:
– the total of time entered for all Mem-
ory-Programme stages with a power
setting of 1200 W adds up to more
than 10 minutes.
– the total time entered for all the Mem-
ory-Programme stages with a power
setting of 850 W adds up to more
than 60 minutes.
. . . An "F" appears in the display field
together with a number
This combination indicates a fault mes-
sage.
The fault message "
F02
" appears when
the door is opened and at the same
time the Start touch control is pressed.
^
Disconnect the appliance from the
power supply (switch off and remove
the plug from the socket, or switch off
at the isolator, and then reconnect im-
mediately.
The Fault message disappears.
This also applies to the fault message
"
F01
".
If the fault message remains in the dis-
play field, or reappears after Start is
pressed in, call the Service department.
If an
F in combination with any other
number appears
e.g. "F10", "F11",
"F12",
^
call the Service department.
Remember to quote the fault code
displayed.
Problem solving guide
75