When using the microwave different
power levels may be required by the
one process, e.g. defrosting followed
by reheating or cooking food.
These different power levels can be
stored together with the relevant times
required and called up all at once using
the Memory touch control. Food should
be left to stand for a few minutes at
room temperature when it has been
cooked in the microwave. This is to en-
sure that the temperature is evenly dis-
tributed throughout the food. This
standing time can also be stored using
the Memory function (Microwave power
setting: 0 W).
Up to 5 stages can be stored in se-
quence. Use the Memory function as
follows:
Enter the stages of the programme
in the sequence you wish them to
run.
^
Turn the function selector to micro-
wave mode.
^
Enter the microwave power level.
^
Press Enter to confirm.
^
Enter the time.
In total a microwave power level of
1200 W for a maximum of 10 min-
utes and a microwave power level of
850 W for a maximum of 60 minutes
can be entered.
^
Press the Memory touch control to
store the entries in the memory.
Enter each stage in this way. The num-
ber after the "M" in the display area will
indicate which memory stage is being
stored.
^
Begin the programme by pressing
the Start touch control.
The time left to run for the programme
will count down in the data entry dis-
play.
The time and the microwave power
level for the stage currently counting
down will appear in the selected set-
tings display.
After each programme stage, the num-
ber in the display will disappear and
the next process will begin.
Correcting programmes
^
Press the Stop/C touch control.
All the entries which had been made
are now cancelled and need to be en-
tered again.
Memory function
38
Start
2
3 4
5
