Miele G5930 Operating Instructions Manual Download Page 8

Page: 8 / 88

This appliance is communication
enabled and can be linked into the
Miele

home system via a

communication module

(optional

accessory).

Miele

home enabled appliances send

information via the household power
supply network

to the master

appliance

about the operational

status of the appliances, as well as
information about the progress of the
programme.

Displaying information, controlling
appliances

– SuperVision master appliance

The status of other communication
enabled appliances in the system
can be shown in the display of the
SuperVision master appliance.

– Mobile terminal appliances

A PC, Notebook or an iPod* /

iPhone* can be used within the
operating radius of a WLAN

display status information about the
networked appliances and to carry
out some operational commands.

– Household network

Miele

home enables smarter living.

With the Miele

home Gateway

communication-enabled appliances
can be integrated into the domestic
bus system.

* iPod und iPhone are registered trade
marks of Apple Inc.

Smart Grid / SmartStart

Smart Grid enabled appliances can be
started automatically to take advantage
of cheaper electricity tariffs. Reduced
electricity tariffs can be stored in the
Miele

home Gateway

, which then

starts the appliance automatically at the
right time.

Optional accessories required

– Communication module XKM 2000

– Miele

home Gateway

Both of these are supplied with their
own installation and operating
instructions.

Further information

Further information about Miele

home,

SuperVision and future options can be
found on the Miele website and in the
operating instructions of the individual
Miele

home components, for example,

the Miele

home Gateway.

Miele

{

home

Summary of Contents for G5930

























































































Search results

Summary of Contents for G5930

Reviews:

Related manuals for G5930

Brands by name

Popular brands

Miele G5930, Operating Instructions Manual

Search results

Summary of Contents for G5930

Reviews:

Related manuals for G5930

Brands by name

Popular brands