Problem
Possible cause
Remedy
The buzzer sounds.
The following fault
message appears in
the display:
Before rectifying the problem:
– Open the door.
– Switch the dishwasher off
with the
K
sensor.
Technical fault FXX
Call Service
There may be a
technical fault.
After a few seconds:
– Switch the dishwasher back
on.
– Select the programme you
want.
– Close the door.
– Select
Start
.
If the fault message appears
again, there is a technical
fault.
– Call the Service
Department.
Waterproof F70
The Waterproof system
has reacted.
– Close the stopcock.
– Call the Service
Department.
Fault with auto. door
closing
The door is sometimes
obstructed by an item
inside the appliance.
– If this is the case, remove
the item and switch the
dishwasher on again.
– If the same message
appears again, call the Ser-
vice Department.
Fault with auto. door
opening
There may be a
technical fault.
– Open the door manually.
– If the same message
appears again, call the Ser-
vice Department.
54
Problem solving guide