Venting the liquid dispensing
system
If your machine is fitted with a liquid
dispensing system:
^
Fill the container with liquid cleaning
agent.
^
Insert the siphon tube
(blue)
into the
container and screw tight.
^
The dishwasher must be switched
off; if not, press the
[
control to
switch off.
^
Press and hold controls
Ä
and
X
together, and at the same time switch
on the dishwasher by pressing
[
.
P11 will appear in the
}
display.
^
Press and hold control
Ä
. The
cleaning agent dispenser will vent
itself, and will then run more quietly.
^
Switch off the dishwasher by
pressing control
[
to exit from input
mode.
Programming the dosage for
liquid cleaning agent
If your machine is fitted with a liquid
dispensing system, and you want to
programme it yourself:
Whilst programming in the cleaning
agent amount, P11 will show in the
}
display, and the current cleaning
agent concentration will show in the
~
display. A value of 10 equates to
1.0 ml/l (the decimal point is not
displayed).
^
The dishwasher must be switched
off; if not, press the
[
control to
switch off.
^
Press and hold controls
Ä
and
X
together, and at the same time switch
on the dishwasher by pressing
[
.
^
Press and hold control
X
. The
operating hour that the current
cleaning agent concentration was
programmed will show in the display.
^
Press control
§
. The cleaning agent
concentration will be reduced to a
minimum of 1.0 ml/l, or 10 in the
display.
^
Press control
°
. The cleaning agent
concentration will be increased to a
maximum of 5.0 ml/l, or 50 in the
display.
^
Press control
4
. The setting will now
be stored in memory.
Control
X
will light up red.
^
Press
[
to switch the machine off.
Venting and programming the dispensing system
25
Summary of Contents for G 8072
Page 7: ...7 ...
Page 51: ...51 ...
Page 52: ...M Nr 05 905 900 01 Alteration rights reserved 3105 ...
