Procedure...
lights
flashes
The correct water hardness is now programmed:
^
Turn off the dishwasher with the “Off” (
o
) button.
To change the water hardness:
^
Press the button that corresponds to the water hard-
ness of your area. As long as the button is held in the
indicator will remain lit.
1 - 5 gr/gal ( 20 - 90 ppm):
button
b
6 - 7 gr/gal (110 - 130 ppm):
button
c
8 gr/gal (140 ppm):
button
d
9 - 11 gr/gal (160 - 200 ppm):
button
e
12 - 14 gr/gal (220 - 250 ppm):
button
f
On +
b
On +
c
On +
d
On +
e
On +
f
Salt
Salt
Salt
Salt
Salt
15 - 70 gr/gal (270 -1260 ppm): see the following page
^
Release the button.
On
Salt +
c
Other indicators may light depending on which features
have been selected:
^
Press
g
button.
On +
g
Salt
^
Press the
g
button once more.
On
Salt +
g
^
Turn the dishwasher off with the “Off” (
o
) button.
The programmed water hardness level is now stored in
the program memory.
^
To check the setting of the water hardness selector
(see “Setting the water hardness level in the wash
cabinet”).
Before using for the first time
15
