Miele G 7960 Operating Instructions Manual Download Page 88

Page: 88 / 128

Extras

IntenseZone

The

IntenseZone

extra increases clean-

ing performance in the lower basket.

Energy consumption increases due to
the extended wash duration in the lower
basket and increased temperature.

Express

The

Express

extra reduces the pro-

gramme duration.

In order to achieve optimum cleaning
results, the temperature, and therefore
the energy consumption, will increase
with this option.

The time by which the programme dura-
tion is shortened varies according to the
selected programme.

Selecting the

Express

extra may take

precedence over other selected op-
tions.

When used in combination with the

QuickPowerWash

programme, the

Ex-

press

extra results in a wash pro-

gramme designed solely for the pur-
pose of rinsing the cabinet to remove
salt solution that leaked out after re-
filling the salt reservoir.

Extra clean

You can select this extra to increase the
cleaning performance of the pro-
grammes.

If you activate this extra, the pro-
gramme durations and the main wash
temperatures will increase. The water
and energy consumption may increase.

Extra dry

You can select this extra to increase the
programme's drying performance.

If you activate this extra, the pro-
gramme durations and final rinse tem-
peratures will increase. The energy con-
sumption may increase.

Summary of Contents for G 7960

































































































































Search results

Summary of Contents for G 7960

Reviews:

Related manuals for G 7960

Brands by name

Popular brands

Miele G 7960, Operating Instructions Manual

Search results

Summary of Contents for G 7960

Reviews:

Related manuals for G 7960

Brands by name

Popular brands