![background image](http://html.mh-extra.com/html/miele/g-7883-cd/g-7883-cd_operating-and-installation-instructions_234835039.webp)
Buzzer
The buzzer can be programmed for the following functions:
– a continuous tone at the end of a program,
– an error signal that beeps in 1-second intervals, and
– a sample-collection signal (allows a sample of the final rinse water to be
collected) that beeps in sets of 3 followed by a 2-sec pause. Contact Miele
Technical Service to program the sample-collection
signal.
The numbers shown in the display correspond to the following settings:
20
Buzzer off
21
End of program (factory setting)
22
Error
23
End of p Error
24
Sample-collection signal
25
End of p Sample-collection signal
26
Error + Sample-collection signal
27
All functions (End of p Error + Sample-collection signal)
Step
Display / Result
^
Press the
0
button until E04 appears in the display.
E04
^
Turn the program selector to "Inorganica".
21
^
Press and hold the
ß
button until the required value
appears in the display, e.g., 26.
26
Value selected:
The buzzer will sound for 30 sec during the selected setting.
To switch it off earlier:
– Turn the program selector to
f
.
– Press the
ß
button.
– Interrupt the power supply, e.g., open the door.
Programming functions
39
Summary of Contents for G 7883 CD
Page 2: ...2 ...
Page 65: ...INSTALLATION INSTRUCTIONS ...
Page 75: ...75 ...
Page 76: ...Subject to change without notice 5207 M Nr 07 157 440 00 ...