![background image](http://html.mh-extra.com/html/miele/g-7860/g-7860_operating-instructions-manual_234829049.webp)
Connection to the water inlet
,
Water in the machine must not
be used as drinking water.
^
The machine must be connected to
the water supply in accordance with
local and national water authority
regulations.
^
This machine is constructed to
comply with German water
regulations (DVGW), and may be
connected to a suitable supply
without an extra non-return valve if
national regulations permit.
^
The water pressure (flow rate) must
be a minimum of 0.5 bar (50 kPa).
If the water pressure (flow rate) is
below 2 bar (200 kPa), the filling time
is automatically extended.
The max. permitted static pressure is
10 bar (1000 kPa).
If the water pressure is not in the
range of 0.5 to 10 bar (50-1000 kPa),
the
p
/
6
indicator light may come
on and the fault code "F..E" will show
in the display. Please contact the
Miele Service Department.
^
The machine is supplied as standard
for connection to a cold (coded blue)
and a hot (coded red) water supply
up to a max. temperature of 70 °C.
The inlet hoses should be connected
to the stopcocks for the hot and cold
water supplies. The steam condenser
inlet hose (without waterproof
connector) should be connected to
the cold water stopcock.
If there is no hot water connection,
the hot water inlet hose marked red
should also be connected to a cold
water stopcock.
^
Stopcocks with 3/4 BSP male thread
are to be provided on site. They
should be easily accessible so that
the water supply can be turned off
when the machine is not in use.
^
The DN 10 inlet hoses are approx.
1.7 m long terminating in a 3/4 inch
female thread. On no account must
the inlet filters be removed.
^
Large surface area filters are
enclosed in the kit supplied with the
machine for installing between the
stopcock and the inlet hose
(see illustration in "Cleaning and Care
- Water inlet").
,
The inlet hoses must not be
shortened or damaged in any way
(see illustration).
See also the installation diagram
supplied.
Plumbing
49
Summary of Contents for G 7860
Page 27: ...27 ...