Miele G 7104 Page 73 Operating Instructions Manual Download

Page: 73 / 108

Programme options

Selecting programme options

You can use programme options to
adjust the programmes.

To do this, you can select the
programme options before starting the
programme.



Switch the dishwasher on with the



button.

The

Start

indicator light will flash.



Select a programme as required.



Press the button for the programme
option you want.

The indicator light for the relevant
button will come on when the
programme option is selected.

If the programme option is not
compatible with the selected
programme, a message to this effect
will appear in the display.



In this event, confirm the message
with

The selected programme option will
remain active for that particular
programme until the selection is
changed.

Express



The



Express

programme option

reduces the programme duration.

In order to achieve optimum cleaning
results, the temperature, and therefore
the energy consumption, will increase
with this option.

The time by which the programme
duration is shortened varies according
to the selected programme.

Selecting the



Express

programme

option may take precedence over other
selected options.

When used in combination with the

QuickPowerWash

programme, the



Express

programme option results

in a rinse designed solely for the
purpose of flushing out the wash
cabinet to remove salt solution that
leaked out after refilling the salt
reservoir.

IntenseZone



The



IntenseZone

programme option

increases cleaning performance in the
lower basket.

Energy consumption increases due to
the extended wash duration in the lower
basket and increased temperature.

Summary of Contents for G 7104













































































































Search results

Summary of Contents for G 7104

Reviews:

Related manuals for G 7104

Brands by name

Popular brands

Miele G 7104, Operating Instructions Manual

Search results

Summary of Contents for G 7104

Reviews:

Related manuals for G 7104

Brands by name

Popular brands