Miele G 7104, Operating Instructions Manual

Page: 100 / 108

Installation
*INSTALLATION*
100
Drainage
The appliance drainage system is fitted
with a non-return valve, which prevents
dirty water from flowing back into the
dishwasher via the drain hose.
The dishwasher is supplied with
approx. 1.5 m of flexible drain hose with
an internal diameter of 22 mm.
The hose can be extended using a
connection piece to attach a further
length of hose. The drainage length
must not be longer than 4 m and the
delivery head no higher than 1 m.
If the hose is to be directly connected
to the drainage outlet on site, use the
supplied hose clip (see the installation
plan).
The hose can be directed to the left or
the right of the appliance.
The on-site connector for the drain hose
can be adapted to different hose
diameters. If the connector extends too
far into the drain hose, it must be
shortened. Otherwise, the drain hose
can become clogged.
The drain hose must not be shortened.
Lay the drain hose so that it does not
kink and is not being subjected to
pressure or being tugged.

Risk of damage from leaking
water.
Overflowing water can cause
damage.
After using the appliance for the first
time, make sure that the water drain
does not leak.