manualshive.com logo in svg

Miele G 7104, Operating Instructions Manual, Page: 33 / 108

Share
Download
Miele G 7104 Operating Instructions Manual Download Page 33

Settings

33

Rinse Aid

You can adjust the rinse aid dosage for
best results. 
The rinse aid dosage can be set from 0
to 6 ml. 
3 ml is the factory default setting.

If spots appear on crockery and
glassware:

- Increase the rinse aid dosage.

If clouding or smearing appears on
crockery and glassware:

- Decrease the rinse aid dosage.

Consumption (EcoFeedback)

You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption
before a programme, and the actual
consumption after the end of the
programme. 
In this menu you can also call up the
total consumption of energy and water
for all the wash programmes you have
run on your dishwasher to date (see
“Caring for the environment -
EcoFeedback consumption display“).

Displaying Consumption

Select the 

Consumption display

 menu

option and confirm with 

OK

.

Select the setting you want and
confirm with 

OK

.

Displaying Total consumption

Select the 

Total consumption

 menu

option and confirm with 

OK

.

You can display the values for 

Energy

and 

Water

 using the 



 buttons.

You can also reset the values for the
total consumption to 0.

Select the 

Reset

 menu option and

confirm with 

OK

.

Select the 

Yes

 menu option and

confirm with 

OK

.

Confirm the message with 

OK

.

The values are now reset to 0.

Summary of Contents for G 7104













































































































Reviews:

No comments