background image

Before using for the first time

23

Filling the salt reservoir

Important! Before filling the salt res‐

ervoir with dishwasher salt for the

first time, you must fill it with approx.

2 qt (2 l) of water to enable the salt to

dissolve.
Once the dishwasher has been used

for the first time, there is always suf‐

ficient water in the reservoir.

Remove the lower basket and un‐

screw the salt reservoir cap.

Water will run out of the reservoir

when the cap is removed.
It should therefore only be removed

in order to refill the salt reservoir.

Fill the reservoir with approx. 2 qt (2 l)

of water (first use only).

Place the funnel provided over the

salt reservoir and carefully fill with

salt until the reservoir is full. The salt

reservoir holds approx. 4 lbs (2 kg) of

salt depending on the brand used.

Clean any excess salt from around

the reservoir opening and then screw

the cap on again firmly.

Immediately after filling the salt reser‐

voir, run the 

Express

 program with

the 

Short

 program option selected

and without any dishware in the dish‐

washer to remove any traces of salt

from the cabinet.

Summary of Contents for G 6980





































































































Reviews: