Miele G 6980 Page 74 Operating Instructions Manual Download

Page: 74 / 100

Frequently Asked Questions

Problem

Possible cause and solution

All TimeControl func‐

tion controls are flash‐

ing quickly.

The warning buzzer is

sounding.

One of the following

faults appears in the

display:

Before fixing the fault:



Turn the dishwasher off using the



sensor but‐

ton.



Technical fault FXX

There may be a technical fault.
After a few seconds:



Turn the dishwasher back on.



Select the desired program.



Close the door.

If the error message is displayed again, there is a

technical fault.



Contact Miele Service.



Waterproof fault

The WaterProof System has reacted.



Turn off the water supply.



Contact Miele Service.



Technical fault F78

A fault has occurred in the circulation pump.



Turn the dishwasher off for at least 30 seconds

with the



sensor button.



Turn the dishwasher back on.



Select the desired program.



Close the door.

If the error message is displayed again, there is a

technical fault.



Contact Miele Service.

Summary of Contents for G 6980





































































































Search results

Summary of Contents for G 6980

Reviews:

Related manuals for G 6980

Brands by name

Popular brands

Miele G 6980, Operating Instructions Manual

Search results

Summary of Contents for G 6980

Reviews:

Related manuals for G 6980

Brands by name

Popular brands