![background image](http://html.mh-extra.com/html/miele/g-691/g-691_operating-instructions-manual_234783047.webp)
Problem
Possible cause
Remedy
The “Water inlet” indica-
tor light flashes shortly
after the start of a pro-
gramme
The stopcock is closed.
Open the stopcock fully.
If a programme will not
continue:
–
Press “Start/Stop” button
for at least 1 second.
All indicator lights next to
the programme buttons
light up.
–
Switch the dishwasher
off using the “On/Off”
button,
–
Start the programme
again.
The flow pressure at the
water inlet is lower than
0.3 bar.
Seek professional advice.
The filter in the water inlet
is blocked.
Before rectifying the
problem you must:
–
Press the “Start/Stop”
button for at least 1
second.
All indicator lights next to
the programme buttons
light up.
–
Switch the dishwasher
off using the “On/Off”
button,
then:
–
Clean the filter in the
water inlet.
The “Water inlet” indica-
tor light comes on dur-
ing the “Energy Save”
programme
The intake water has not
reached the required
temperature of 45 °C, the
hot water system may be
overloaded (see
“Programme selection”).
–
Start the programme
again.
–
If the indicator light
comes on again, select
a different programme.
Problem solving guide
47