![background image](http://html.mh-extra.com/html/miele/g-6160/g-6160_operating-instructions-manual_234730058.webp)
Programme options
58
Buzzer tones
A sequence of audible tones will sound
at the end of the programme or if there
is a fault.
The buzzer at the end of a programme
and warning tones in the event of a
fault sound 4 times at intervals with a
short pause between each set of tones.
The buzzer tones are set to off at the
factory.
If you want the buzzer to sound at the
end of a programme, you will have to
switch it on. Buzzer tones for faults are
always active.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector button
in and,
whilst holding it in
, switch
the dishwasher on using the
but‐
ton.
Keep the programme selector button
pressed in for at least four sec‐
onds until the lower right-hand pro‐
gramme indicator comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the button
four times.
The indicator
will flash rapidly four
times at intervals.
The flashing sequence in the display
shows whether the buzzer at the end of
the programme is activated or deactiva‐
ted.
–
: Buzzer tones are switched on
–
: Buzzer tones are switched off
Press the programme selector button
if you wish to change the setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Summary of Contents for G 6160
