Before using for the first time
27
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml. It is set to a recommen‐
ded setting of approx. 3 ml at the facto‐
ry.
The dosage can turn out to be higher
than the set value due to the automatic
adjustment of the
Sensor wash
pro‐
gramme.
If spots appear on crockery and glass‐
ware:
Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
Decrease the rinse aid dosage.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector button
in and,
whilst holding it in
, switch
the dishwasher on using the
but‐
ton.
Keep the programme selector button
pressed in for at least four sec‐
onds until the lower right-hand pro‐
gramme indicator light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the button
three times
briefly.
The indicator
will flash rapidly three
times at intervals.
The dosage set will appear in the dis‐
play after
.
will flash in the display.
This means that the rinse aid dosage
has been set to 3 ml at the factory.
Use the programme selector button
to select the rinse aid dosage you
want.
The dosage amount alters each time
you press the button.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Summary of Contents for G 6160
