![background image](http://html.mh-extra.com/html/miele/g-611-3/g-611-3_operating-instructions-manual_234727014.webp)
Programming the water hardness
level
^
Switch the dishwasher off.
^
Turn the programme selector to the
"Stop" position.
^
Press the "Top Solo" button in and
whilst holding it in switch the dish-
washer on using the "On/Off" button.
Release the "Top Solo" button within
two seconds.
The "Salt" indicator light will flash.
Note:
If a different indicator light comes on or
flashes, the process must be repeated.
Exception:
The "Rinse aid" indicator light will come
on if you have not yet added rinse aid
or if rinse aid needs replenishing.
^
Turn the programme selector to the
position that corresponds to your wa-
ter hardness level (see chart below).
°d
German
scale
mmol/l
Programme selector
setting
1 - 4
0.2 - 0.7
"1 o’clock" position
5 - 7
0.9 - 0.3
"2 o’clock" position
8 - 11
1.4 - 2.0
"3 o’clock" position
12 - 16
2.2 - 2.9
"4 o’clock" position
17 - 21
3.1 - 3.8
"5 o’clock" position
22 - 24
4.0 - 4.3
"6 o’clock" position
25 - 31
4.5 - 5.6
"7 o’clock" position
32 - 70
5.8 - 12.6
"8 o’clock" position
The dishwasher is set at the factory for
a hardness level of 2.2 -2.9 mmol/l
(12 -16 °d ).
Example:
For a water hardnesss of 1.6 mmol/l,
turn the programme selector to the
"3 o’clock" position.
Before using for the first time
14
Summary of Contents for G 611-3
Page 58: ...Cutlery tray Comparison tests 58 ...
Page 62: ...62 ...
Page 63: ...63 ...
Page 64: ...Alteration rights reserved G611 3 G614 3 0305 M Nr 05 894 210 V03 ...