Miele G 611-3, Operating Instructions Manual

Page: 36 / 64

Drying fan running time
During the drying phase, as long as the
door of the dishwasher remains closed,
moist air is expelled through the ventila-
tion outlet for the drying fan. The drying
fan running time can be increased to
avoid the risk of damage to a worktop
fitted above the dishwasher. If this op-
tion is selected, the fan will continue to
run for approx. 14 minutes after the end
of a programme.
Activating and deactivating in-
creased drying fan running time:
^
Switch the dishwasher off using the
"On/Off" button.
^
Turn the programme selector to the
"Stop" position.
^
Press the "Top Solo" button in and
whilst holding it in switch the dish-
washer on using the "On/Off" button.
Release the "Top Solo" button within
two seconds.
The "Salt" indicator light will flash.
Note:
If a different indicator light comes on or
flashes, the process must be repeated.
Exception:
The "Rinse aid" indicator light will come
on if you have not yet added rinse aid
or if rinse aid needs replenishing.
^
Turn the programme selector to the "9
o’clock" position.
– If the "Top Solo" indicator light does
not come on: the fan running time is
not increased,
– If the "Top Solo" indicator light does
come on:
the fan running time is increased.
^
Press the "Top Solo" button to change
the setting.
Depending on the previous setting the
"Top Solo" indicator light will either
come on or go out.
^
Turn the programme selector to the
"Stop" position.
^
Switch the dishwasher off using the
"On/Off" button.
The change is now stored in memory.
Operating the dishwasher
36