background image

Drying fan running time

During the drying phase, as long as the
door of the dishwasher remains closed,
moist air is expelled through the ventila-
tion outlet for the drying fan. The drying
fan running time can be increased to
avoid the risk of damage to a worktop
fitted above the dishwasher. If this op-
tion is selected, the fan will continue to
run for approx. 14 minutes after the end
of a programme.

Activating and deactivating in-
creased drying fan running time:

^

Switch the dishwasher off using the
"On/Off" button (13).

^

Press the "Start/Stop" button (17) in
and whilst holding it in switch the
dishwasher on using the "On/Off" but-
ton. Release the "Start/Stop" button
within two seconds.

^

Press the "Top Solo" button (18).

The "Salt" indicator light (15) will flash
and the "End" indicator light (16) will
come on.

If this is not the case the process must
be repeated.

The fan running time is not increased,
if:
– the uppermost programme indicator

light is flashing

The fan running time is increased, if
– the uppermost programme indicator

light is lit up

If the drying heat setting is the one you
want (activated or deactivated):

^

Switch the dishwasher off using the
"On/Off" button (13).

If you wish to change the drying heat
setting:

^

Press the "Top Solo" button (18).

^

Press the "Start/Stop" button (17)
twice.

The "Start/Stop" indicator light (17) will
flash.

^

Switch the dishwasher off using the
"On/Off" button (13).

The change is now stored in memory.

Operating the dishwasher

39

Summary of Contents for G 6 series









































































Reviews: