Miele G 5970 Operating Instructions Manual Download Page 61

Page: 61 / 84

General problems with the dishwasher

Problem

Possible fault

Solution

The display is dark.

The dishwasher has
gone into "Standby"
mode to save energy.

– Turn the dishwasher off

using the

button.

The interior lighting is
not turned on when
the door is opened.

The interior light was
turned off.

– Turn the interior light on

(see "Additional options-
BrilliantLight").

The optical function
flashes rapidly.
The buzzer sounds.
The display shows the
following fault
message:

Middle spray arm
blocked

Lower spray arm blocked

The middle or lower
spray arm is blocked by
dishware.

– Open the dishwasher door

and rearrange items
blocking the spray arms.

The spray arm jets of
the middle or lower
spray arm are clogged.

– Turn the dishwasher off

Then:

– Clean the spray arms. See

"User Maintenance
Instructions".

Frequently asked questions

Summary of Contents for G 5970





















































































Search results

Summary of Contents for G 5970

Reviews:

Related manuals for G 5970

Brands by name

Popular brands

Miele G 5970, Operating Instructions Manual

Search results

Summary of Contents for G 5970

Reviews:

Related manuals for G 5970

Brands by name

Popular brands