Miele G 5970 Operating Instructions Manual Download Page 54

Page: 54 / 84

Keypad tone

A tone will sound when a button is
pressed.

The volume can be set to 17 different
levels.

Select the desired setting and
confirm with OK.

Brightness

The display brightness can be adjusted
in 17 levels.

Select the desired brightness and
confirm with OK.

Memory

The memory function allows you to save
the last selected program.

When turning the dishwasher off and on
again after a program has finished or
opening and closing the door, the last
selected program is displayed instead
of the main menu.

The function is turned on by default.

Select the desired option and confirm
with OK.

RemoteVision

(Optional accessory.
To learn more about RemoteVision
visit www.miele.com.)

Select

to show module state.

If "

module connected and ready" is

displayed, no further action is required.

Via the "Options" menu you can:

– Reboot the module

– Reset the factory default settings

– Enter Ad-Hoc mode

Refer to the "RemoteVision" section
of this manual or the RemoteVision
Installation manual for further
instructions.

Settings

Summary of Contents for G 5970





















































































Search results

Summary of Contents for G 5970

Reviews:

Related manuals for G 5970

Brands by name

Popular brands

Miele G 5970, Operating Instructions Manual

Search results

Summary of Contents for G 5970

Reviews:

Related manuals for G 5970

Brands by name

Popular brands