Miele G 5970 Operating Instructions Manual Download Page 58

Page: 58 / 84

Problem

Possible fault

Solution

The optical interface
flashes fast, the buzzer
sounds or the display
shows the fault:

Before trying to remedy the
fault:

– Turn the dishwasher off

with the

button.

;

Technical fault FXX

There may be a
technical fault.

After a few seconds:

– Turn the dishwasher on.

– Select the desired

program.

– Close the door.

If the problem persists,
contact Technical Service.

Waterproof fault F70

The waterproof system
has activated.

– Turn off the water supply.

Contact Miele Technical
Service.

Automatic door closing
fault F32

The door may be
blocked.

– Remove the item, if

necessary restart the
program.

If the message shows again
contact Miele Technical
Service.

Automatic door opening
fault F33

Possible technical fault. – Open the door by hand

and restart the program.

If the message shows again
contact Miele Technical
Service.

Frequently asked questions

Summary of Contents for G 5970





















































































Search results

Summary of Contents for G 5970

Reviews:

Related manuals for G 5970

Brands by name

Popular brands

Miele G 5970, Operating Instructions Manual

Search results

Summary of Contents for G 5970

Reviews:

Related manuals for G 5970

Brands by name

Popular brands