Miele G 5260 Operating Instructions Manual Download Page 73

Page: 73 / 92

Problem solving guide

Water inlet fault

Problem

Cause and remedy

The dishwasher stops
working shortly after
the programme starts.
The alarm tone is
sounding.
The





indicator

light flashes on and off.



and

173

appear altern-

ately on the time dis-
play.

The stopcock is closed.



Open the stopcock fully.

The dishwasher stops
during a programme.
The alarm tone is
sounding.
The





indicator

light is flashing.
The fault number





appears in the dis-

play.

Before rectifying the problem:



Switch the dishwasher off with the



button.

The water inlet is restricted.



Open the stopcock fully and start the programme
again.



Clean the filter in the water inlet (see “Cleaning
and care” – Cleaning the filter in the water inlet”).



The water-connection pressure is lower than
50 kPa.
Seek professional advice.



The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see “Installation – Water drainage”).

The dishwasher stops
during a programme.
Fault number

8

ap-

pears in the time dis-
play.

A technical fault has occurred.



Switch the dishwasher off.



Close the stopcock.



Call the Miele Customer Service Department.

Summary of Contents for G 5260





























































































Search results

Summary of Contents for G 5260

Reviews:

Related manuals for G 5260

Brands by name

Popular brands

Miele G 5260, Operating Instructions Manual

Search results

Summary of Contents for G 5260

Reviews:

Related manuals for G 5260

Brands by name

Popular brands