Miele G 5260 Operating Instructions Manual Download Page 20

Page: 20 / 92

Before using for the first time

Displaying and setting the water
hardness



Open the door.



Switch the dishwasher off with the



button, if it is switched on.



Press the



button in and,

whilst

holding it in

, switch the dishwasher

on using the



button.

Keep the



button pressed in for at

least 4 seconds until the



indicator

light comes on.

If this does not happen, start the pro-
cedure from the beginning again.



Press the



programme selection

button 2 times.

The top left indicator light will flash rap-
idly 2 times at intervals.

The value set for the water hardness is
shown as a figure after



in the time dis-

play.

  4

will start flashing in the time dis-

play.
A water hardness of 14 °dH is set.



Use the



button to set the water

hardness value in your area.
The dosage amount increases each
time you press the button. When the
highest value is reached, the setting
starts again from the beginning.

The setting is now saved.



Switch the dishwasher off with the



button.

Summary of Contents for G 5260





























































































Search results

Summary of Contents for G 5260

Reviews:

Related manuals for G 5260

Brands by name

Popular brands

Miele G 5260, Operating Instructions Manual

Search results

Summary of Contents for G 5260

Reviews:

Related manuals for G 5260

Brands by name

Popular brands