Miele G 5260 Operating Instructions Manual Download Page 42

Page: 42 / 92

Detergent

Adding detergent



Press the yellow button



on the lid

of the detergent compartment.

The lid will spring open.
The lid will also open at the end of a
programme sequence.



Add the detergent to the detergent
compartment.



Push the lid shut until you hear it click
into place.

The detergent must not cause the
detergent compartment lid to get
stuck. This can prevent the lid from
opening during the programme se-
quence.
Do not overfill the detergent com-
partment.



Ensure that the detergent packaging
is properly closed after use. This pre-
vents the detergent from getting
damp and clumping together.



You can also apply a small amount of
detergent to the inner panel of the
door in programmes that have a pre-
wash stage (see “Programme over-
view”).

Summary of Contents for G 5260





























































































Search results

Summary of Contents for G 5260

Reviews:

Related manuals for G 5260

Brands by name

Popular brands

Miele G 5260, Operating Instructions Manual

Search results

Summary of Contents for G 5260

Reviews:

Related manuals for G 5260

Brands by name

Popular brands