Programme options
51
If optimise standby is switched on
(see "Programme options, Optimise
standby") the display will go out after
a few minutes, leaving just the
Start
indicator flashing slowly.
Press any button to switch the display
back on again for a few minutes.
The time up until the programme starts
will show counting up in the display in
hours for durations above 10 hours,
and in minutes for durations below this.
When the set time is reached, the
programme selected will start
automatically. The time remaining will
appear in the display and the
indicator light will go out.
How the Delay start time is shown in
the display:
up to 59 minutes:
e.g. 30 minutes =
.
1 hour up to 9 hours 30 minutes:
e.g. 5 hours =
.
over 10 hours:
e.g. 15 hours =
Starting a programme before the
Delay start period has elapsed:
A programme can be started before the
Delay start period has elapsed.
Proceed as follows:
Switch the dishwasher off with the
button.
Switch the dishwasher on again with
the
button.
Select the programme you want.
Press the
Start
button.
The programme will begin and the
Start
indicator light will light up.