Programme options
54
Optimise standby
"Optimise standby" is activated by
default.
To save energy the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a
programme.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
Optimise standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off
increases to 6 hours. Doing this will
increase energy consumption.
Switch the dishwasher off with the
button, if it is switched on.
Press the
Start
button in and
whilst
holding it in
switch the dishwasher
on using the
On button
Keep the
Start
button pressed in for
at least four seconds until the
Start
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
Press the
button 8 times.
The
indicator will flash rapidly 8
times at intervals.
The flashing sequence in the display
shows whether Optimise standby is
activated or not.
–
: "Optimise standby" is activated
–
: "Optimise standby" is switched
off
Press the
Start
button to change the
setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.