Miele G 307, Operating Instructions Manual

Page: 61 / 72

To fix the protective sheet.
Remove the backing from the ad-
hesive strip.
Stick the protective sheet (13) on the
plinth along the edge below the
screws.
To fit the bottom frame strip.
Recess height 876 mm:
Push the bottom frame strip (8) over
the lower ends of the side frame
strips (5).
Recess height 882 mm:
First push the spacer bar (9) from
below onto the bottom frame strip.
To do this loosen the nuts in the
spacer strip push the spacer strip
onto the bottom frame strip and
tighten the nuts again.
File off any protruding screw ends.
Recess height larger than 882 mm:
In this case a package must be put
together of spacer bars (special ac-
cessory) according to the recess
height and pushed under the bottom
frame strip.
Installation
61