Miele G 2872 Operating Instructions Manual Download Page 53

Page: 53 / 80

Issue

Possible fault

Solution

The optical interface
flashes fast, the buzzer
sounds or the display
shows the fault:

A technical problem
occurred. Turn the
machine off, close the
water faucet and call
Technical Service.

There may be a
technical fault.

– Turn the dishwasher off by

touching the

control.

After a few seconds:

– Turn the dishwasher on.

– Select the desired

program.

– Close the door.

If the problem persists,
contact Technical Service.

Fault Waterproof F70

The waterproof system
has activated.

– Turn off the water supply.

– Contact Miele Technical

Service.

Automatic door closing
fault

The door may be
blocked.

– Remove the item, if

necessary restart the
program.

– If the message shows

again contact Miele
Technical Service.

Automatic door opening
fault

Possible technical fault. – Open the door by hand

and restart the program.

– If the message shows

again contact Miele
Technical Service.

Frequently asked questions

Summary of Contents for G 2872

















































































Search results

Summary of Contents for G 2872

Reviews:

Related manuals for G 2872

Brands by name

Popular brands

Miele G 2872, Operating Instructions Manual

Search results

Summary of Contents for G 2872

Reviews:

Related manuals for G 2872

Brands by name

Popular brands