Miele G 2872 Operating Instructions Manual Download Page 52

Page: 52 / 80

With the aid of the following guide, minor problems can be fixed without a service call.

Repairs should only be carried out by a qualified and trained person in

accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.

Technical faults

Issue

Possible fault

Solution

The program does not
start.

The door is not properly
closed.

Close the door firmly.

The machine is not
plugged in.

Insert the plug.

The fuse has tripped.

Reset the circuit breaker.
See data plate for
minimum amperage.

The dishwasher is not
turned on.

Press

and select a

program.

No program is selected.

Select the desired
program.

The dishwasher stops
during a program.

The fuse has tripped.

Reset the circuit breaker.
See data plate for
minimum amperage.

The optic indicator is
not visible when a
program has started.

The reflector was not
properly installed.

Install the reflector
properly, see the
Installation diagram.

Frequently asked questions

Summary of Contents for G 2872

















































































Search results

Summary of Contents for G 2872

Reviews:

Related manuals for G 2872

Brands by name

Popular brands

Miele G 2872, Operating Instructions Manual

Search results

Summary of Contents for G 2872

Reviews:

Related manuals for G 2872

Brands by name

Popular brands