Starting a program
^
Select Start.
The display shows Close the door.
To select another program or to add
options, select Back and cancel the
program with Cancel.
^
Start the program by closing the
door.
The optical interface lights to indicate
that a program is running.
The program starts and Dishes can be
added appears in the display.
As long as this reference is shown,
tableware can be added to the
machine without impairing the cleaning
result.
Cancel a program only in the first
few minutes. Otherwise important
program steps (e.g. the water
softening) could be interrupted.
Time display
Before the program starts, the time
display shows the running time of the
selected program in hours and minutes.
During the running program the
remaining time is shown in the time
display.
The running time for the same program
may vary depending on the intake
water temperature, load size and
soiling.
When a program is selected for the first
time, a time is shown which equals an
average program running time with
cold water.
Each time a program is run, the
electronic adjusts the program running
time according to the intake water
temperature and the load size.
Use
36
