Miele G 1832 Operating Instructions Manual Download Page 76

Page: 76 / 80

Temperature

The temperature can be displayed in
°C/Celsius or °F/Fahrenheit.

The temperature is set at the factory to
be displayed in °C.

Select the option you want and
confirm with

Buzzer

When the buzzer is activated, an
audible tone sounds at the end of a
programme and when there is a fault.

The buzzer at the end of a programme
is deactivated as standard at the
factory.

Buzzer at the end of a programme

You will hear the buzzer at the end of a
programme in bursts of five with a short
pause in between. The buzzer will
continue to sound for up to an hour if
you do not switch the dishwasher off.

Buzzer when there is a fault

In the event of a fault, the buzzer will
sound continuously for up to two
minutes if you do not switch the
dishwasher off or correct the fault.

The buzzer will still sound if there is a
fault, even if it has been deactivated.

Setting the buzzer volume

You can select one of two options or
deactivate the buzzer.

Off

The buzzer at the end of a programme
is deactivated.

Normal

The buzzer sounds at a "normal"
volume.

Loud

The buzzer sounds louder.

Select the volume you want or
deactivate the buzzer.

Confirm with

Settings menu

Summary of Contents for G 1832

















































































Search results

Summary of Contents for G 1832

Reviews:

Related manuals for G 1832

Brands by name

Popular brands

Miele G 1832, Operating Instructions Manual

Search results

Summary of Contents for G 1832

Reviews:

Related manuals for G 1832

Brands by name

Popular brands