Miele G 1520 Operating Instructions Manual Download Page 41

Page: 41 / 68

Factory default setting

If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings as
follows:

Switch the dishwasher off with the
On/Off button

Press the Start/Stop button in and

whilst holding it in

switch the

dishwasher on with the On/Off button

Keep the Start/Stop button pressed in
for at least four seconds until the
Start/Stop indicator light comes on.

If this does not happen, start the
procedure from the beginning again.

Press the Delay start button twelve
times.

The Delay start indicator light will give
one long flash and two brief flashes at
intervals and "

p 0

" or "

p 1

" will flash in

the display.

The characters flashing in the display
show whether a setting other than the
factory default setting has been set.

– "

p 1

": All settings are set to factory

default settings.

– "

p 0

": At least one setting has been

changed.

Press the Start/Stop button if you
wish to re-set all the factory default
settings.

Switch the dishwasher off with the
On/Off button

Operation

Summary of Contents for G 1520





































































Search results

Summary of Contents for G 1520

Reviews:

Related manuals for G 1520

Brands by name

Popular brands

Miele G 1520, Operating Instructions Manual

Search results

Summary of Contents for G 1520

Reviews:

Related manuals for G 1520

Brands by name

Popular brands