![background image](http://html.mh-extra.com/html/miele/g-1171/g-1171_operating-instructions-manual_234599016.webp)
To programme the water hardness
level
Each time a button is pressed, one of
the indicator lights will flash and light
up in the control panel. However, only
the indicator lights mentioned in the
following programming process stages
are significant.
The programming procedure can be
cancelled at any time by pressing the
Off button
V
. The procedure can
then be re-started from the beginning
again.
^
Switch the dishwasher off with the Off
button
V
.
^
Press the programme selector button
;?
in, and
whilst holding it in
switch the dishwasher on using the
On button
U
.
Keep the programme selector button
;?
pressed in until the lower right
hand programme indicator comes
on.
If this does not happen, start the
procedure from the beginning again.
^
Press the programme selector button
;?
twice briefly.
The Inlet/drain check light
2
/
2
will
flash twice briefly at intervals, and the
upper right hand programme indicator
will flash 4 times briefly at intervals
(factory default setting).
^
Press the programme selector button
;?
for at least 1 second until the
Inlet/drain check light
2
/
2
comes
on.
The number of times the upper right
hand programme indicator flashes tells
you the water hardness level which has
been set (see chart).
°d
mmol/l
°f
Flashing
1 - 4
0.2 - 0.7
2-
7
Once briefly
5 - 7
0.9 - 1.3
9- 13
Twice briefly
8 - 11
1.4 - 2.0
14- 20
3 times briefly
12 - 15
2.2 - 2.7
22- 27
4 times briefly
16 - 20
2.9 - 3.6
29- 36
5 times briefly
21 - 25
3.8 - 4.5
38- 45
6 times briefly
26 - 30
4.7 - 5.4
47- 54
7 times briefly
31 - 36
5.6 - 6.5
56- 65
8 times briefly
37 - 45
6.7 - 8.1
67- 81
9 times briefly
46 - 70
8.3 - 12.6
83-126
Once for longer
^
Press the programme selector button
;?
briefly to select the number of
flashes which equates to your water
hardness level.
Each press of the button moves you
up a level. When the highest water
hardness level is reached, the setting
starts from the beginning again.
Example:
If your water hardness level is
4.0 mmol/l (22 °d), the upper right
hand programme indicator should
flash briefly six times at intervals.
^
Switch the dishwasher off with the Off
button
V
.
Before using for the first time
16
Summary of Contents for G 1171
Page 61: ...61 ...
Page 62: ...62 ...
Page 63: ...63 ...
Page 64: ...Alteration rights reserved G1171 G1172 G2171 G2172 4407 M Nr 07 001 971 00 ...