The dishwasher does not fill/drain.
Problem
Possible cause
Remedy
The dishwasher
stops working
shortly after the start
of the programme.
The buzzer sounds.
The Inlet/drain check
light
2
/
2
flashes
when the door is
opened.
The stopcock is
closed.
– Open the stopcock fully.
The dishwasher
stops during a
programme.
The buzzer sounds.
The Inlet/drain check
light
2
/
2
flashes
when the door is
opened.
Before rectifying the problem you
must:
– Switch the dishwasher off with the
Off button
V
.
Water intake is
restricted.
– Open the stopcock fully.
– Clean the water inlet filter (see
"Maintenance").
– The water pressure at the intake is
lower than 30 kPa (0.3 bar).
Seek professional advice.
Water outlet is
restricted, water
remains in the
wash cabinet at
the end of a
programme.
– Clean the filter combination. See
"Cleaning and care".
– Clean the drain pump. See
"Maintenance".
– Clean the non-return valve. See
"Maintenance".
– Remove any kink in the drain
hose.
Problem solving guide
45
Summary of Contents for G 1171
Page 61: ...61 ...
Page 62: ...62 ...
Page 63: ...63 ...
Page 64: ...Alteration rights reserved G1171 G1172 G2171 G2172 4407 M Nr 07 001 971 00 ...