Miele G 1021 Operating Instructions Manual Download Page 57 | Manualshive

Page: 57 / 64

background image

Electrical connection U.K.

,

All electrical work must be

carried out by a suitably qualified
and competent person, in
accordance with current local and
national safety regulations (BS 7671
in the UK).

Ensure power is not supplied to the
appliance until after installation work
has been carried out.

The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply. Please ensure the connection
data quoted on the data plate match
the household mains supply.

Connection should be made via a
suitable switched socket which is easily
accessible after installation.

For extra safety it is advisable to install
a suitable residual current device
(RCD). Contact a qualified electrician
for advice.

Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).

Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.

WARNING: THIS APPLIANCE
MUST BE EARTHED

Electrical connection

57

«
...
55
56
57
58
59
...
»

Summary of Contents for G 1021

































































Reviews:

No comments

Related manuals for G 1021

Brand: Washtech Pages: 44

Brand: Haier Pages: 14

Brand: Haier Pages: 2

DW60A608 Series

Brand: Samsung Pages: 72

Brand: Samsung Pages: 90

Brand: Samsung Pages: 20

Brand: Samsung Pages: 106

Brand: Blanco Pages: 16

Brand: JUNO Pages: 10

Brand: Fisher & Paykel Pages: 12

Brand: NEFF Pages: 32

Brand: Hamach Pages: 55

Brand: Mach Pages: 41

AdoraDish V6000

Brand: V-ZUG Pages: 60

Brand: Leonard Pages: 497

FRONT-LOADING MULTI-LOAD COIN-OPERATED COMMERCIAL WASHER

Brand: Maytag Pages: 4

Brand: Samsung Pages: 200

Brand: Haier Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands